How To Fix The Print Lean On Canon

We want to print a document, the paper was always skewed, and not interested in all. Or even do not want to withdraw the paper, only rollernya muter2 aja ..
This problem is most likely due to foreign objects get into the paper tray or maybe even get into the engine (ga tau real name part, just inside the printer is ...). Trus gimana dong .. OK, straight to the scene ...
For a paper that has always pulled him sideways, or want to come in part, then hours ...

1. Unloading your printer
2. Check at the bottom of the puller roller paper (from end to end it).
3. Are there any foreign objects (dirt, paper clips, coins, pencils, dead insects, or anything else)
4. If a hard look at or check, all the springs off the retaining roller (What's really name?)
5. Usually the foreign object is pinched, clean / dispose of objects that are stuck.
6. Replace the spring and the other, the printer is installed before the test covers.

For printers that do not want to pull the paper at all:

1. Unloading your printer.
2. In the mechanical printer (usually a set, which is located under the roller and the paper tray) there is one couple in which there is a spring wheel.
3. Usually the wheel is separated from its seat (held by a needle-like long irons).
4. If the wheel is cuman off, you simply put back.
5. But when the spring (inside) wheel is damaged, usually susuananya messy, it's not round at all.
6. You can cut pegasnya maximum of 50% of the existing spring.
7. This spring functioning to regulate the direction of rotation only. If pegasnya too little, then the rotation will occur in both directions, up to two-way if it can not be used.
8. If it still can be cut safely deh ...
9. Ga can be cut if forced to find another printer kanibalan form

The steps above can be used on the printer type MP 140, MP 150, MP160, IP 1200, IP1300, IP 1700, IP 1880, and IP 1980