Canon MP258 printer error codes and how to cope

Canon MP258 Error Codes and How to Overcome It


MP258 Error code there are 2 types of codes, namely:
1. who use the first letter P, for example P07
2. who use the first letter E, eg E05

Canon MP258 Error code C:
P02 (Carriage error)
Solution:
1. Make sure no foreign object stuck in the roll printer reply.
2. Clean and check the encoder, may be subject to splashes of ink.

P03 (Line feed error)
Cause: Timing Disk dirty / damaged.
Solution:
1. Check the timing disc sensor to the left of the printer
2. Check and clean boardnya.

P05 (ASF sensor error)
Cause: The paper detection sensor Canon MP258 Error.
Solution:
Try changing one of the following parts:
ASF / PE sensor unit.
Motor.
MP258 Canon printer board.


P06 (Internal temperature error):
Cause: The hyperbolic heat inside the Canon MP258 printer.
Solution:
1. Clean the inside of the MP258 printer.
2. replace Board MP258 Printer

P07 (Ink absorber full):
Cause: Ink Counter Full / Full, Canon MP258 Printer'm on reset using software.
Solution: Reset Canon MP258 Printer using the software

P08 (Print head temperature rise error):
Cause: Head too hot, exceeding the threshold, usually Cartridge color
Solution:
Try changing the color catrid Canon MP258 printer.

P09 (EEPROM error)
Cause: Canon MP258 experienced board EEPROM Corrupt or damaged.
Solution:
1. Board replace Canon MP258.

Q15 (Vbus USB over current)
Cause: The printer cable USB overcurrent of Canon MP258 Printer.
Solution:
1. Try to Change Printer Canon MP258 USB cable.
2. If still defective, replace the Canon MP258 Printer Board.

P20 (Other hardware error)
Cause: damage to other hardware
Solution:
Board replace Canon MP258.

P22 (Scanner error)
Cause: The scanner does not work
Solution:
1. Replace Canon MP258 printer scanner.
2. Board Replace Canon MP258 printer.

Canon MP258 Error code E:

E04: Canon MP258 Cartridge is not installed properly.
Solution: Take the cartridge, plug it again trus

E05: Canon MP258 Cartridge is not installed properly or one catrid some damaged
Solution:
1. Take the cartridge, plug it again trus
2. Replace the cartridge if some damaged

E14 and E15: Canon MP258 Cartridge is not installed properly.
Solution: Take the cartridge, plug it again trus

E13 and E16: Ink has run out / ask for the reset catridge.
Solution:
Press the STOP / Reset for 5 - 15 seconds wait until the LED display proceeds.

May be useful