.quickedit{ display:none; }
Selamat datang di blog yang sederhana ini....Terimakasih Atas kunjungan Anda diblog ini...!! Semoga Anda tidak bosan dengan isi Blog ini dan Anda bisa kembali berkunjung lagi.

Senin, 03 Oktober 2011

How to Resetter Canon MP258 error 5B00 or P07


this post discusses the way resetter Canon MP258 error 5B00 or P07/ Since many who seek MP258 resetter software error 5B00 or P07, then let's go straight to the scene......

Early indications:
When the MP258 printer is turned on will show an error in the LCD panels P07 and the monitor screen will pop up an error 5B00.

Resetter Canon MP258 way or P07 error 5B00:
1. MP258 Printer Error 5B00 or P07 are turned off and plugged the power cord.
2. Press the STOP / RESET and hold, then press and hold the POWER button.
3. POWER button still pressed, release the buttonSTOP / RESET, then press the STOP / RESET 2 times in a state the power button is pressed.
4. Release both buttons simultaneously.
5. MP258 Printer Error 5B00 or P07 which will proceed in a while (a while), then the LCD panel will show the number zero (0)
6. The computer will detect NEW DEVICE, Ignore it .....
7. This situation shows MP258 printer in ready state and reset the SERVICE MODE.

How to Run Resetternya:
1. File Exctract MP258 Resetter for error 5B00 or P07
2. Prepare a second paper in the printer (to print at this time of the reset process)
3. Run the program for error 5B00 MP258 Resetter or P07
4. Click "PLAY", then the printer will proceed and MP258 will print one page with the words "D = 000.0"
5. Click the "Clear EEPROM".
6. Then click the "EEPROM", and the printer will print the results MP258 Resetter. Writing one line as follows:
"TPage (COPY TTL = 00 000 = 00 000)"
7. Turn off the printer by pressing the POWER button.
8. And MP258 Printer Error 5B00 or P07 which is ready to use again. Done ...

Canon MP258 printer error codes and how to cope

Canon MP258 Error Codes and How to Overcome It


MP258 Error code there are 2 types of codes, namely:
1. who use the first letter P, for example P07
2. who use the first letter E, eg E05

Canon MP258 Error code C:
P02 (Carriage error)
Solution:
1. Make sure no foreign object stuck in the roll printer reply.
2. Clean and check the encoder, may be subject to splashes of ink.

P03 (Line feed error)
Cause: Timing Disk dirty / damaged.
Solution:
1. Check the timing disc sensor to the left of the printer
2. Check and clean boardnya.

P05 (ASF sensor error)
Cause: The paper detection sensor Canon MP258 Error.
Solution:
Try changing one of the following parts:
ASF / PE sensor unit.
Motor.
MP258 Canon printer board.


P06 (Internal temperature error):
Cause: The hyperbolic heat inside the Canon MP258 printer.
Solution:
1. Clean the inside of the MP258 printer.
2. replace Board MP258 Printer

P07 (Ink absorber full):
Cause: Ink Counter Full / Full, Canon MP258 Printer'm on reset using software.
Solution: Reset Canon MP258 Printer using the software

P08 (Print head temperature rise error):
Cause: Head too hot, exceeding the threshold, usually Cartridge color
Solution:
Try changing the color catrid Canon MP258 printer.

P09 (EEPROM error)
Cause: Canon MP258 experienced board EEPROM Corrupt or damaged.
Solution:
1. Board replace Canon MP258.

Q15 (Vbus USB over current)
Cause: The printer cable USB overcurrent of Canon MP258 Printer.
Solution:
1. Try to Change Printer Canon MP258 USB cable.
2. If still defective, replace the Canon MP258 Printer Board.

P20 (Other hardware error)
Cause: damage to other hardware
Solution:
Board replace Canon MP258.

P22 (Scanner error)
Cause: The scanner does not work
Solution:
1. Replace Canon MP258 printer scanner.
2. Board Replace Canon MP258 printer.

Canon MP258 Error code E:

E04: Canon MP258 Cartridge is not installed properly.
Solution: Take the cartridge, plug it again trus

E05: Canon MP258 Cartridge is not installed properly or one catrid some damaged
Solution:
1. Take the cartridge, plug it again trus
2. Replace the cartridge if some damaged

E14 and E15: Canon MP258 Cartridge is not installed properly.
Solution: Take the cartridge, plug it again trus

E13 and E16: Ink has run out / ask for the reset catridge.
Solution:
Press the STOP / Reset for 5 - 15 seconds wait until the LED display proceeds.

May be useful
Adhe edogawa.

Check Page Rank Blog/Web site Anda disini:

This page rank checking tool is powered by Page Rank Checker service

Like Facebook

Pengikut