.quickedit{ display:none; }
Selamat datang di blog yang sederhana ini....Terimakasih Atas kunjungan Anda diblog ini...!! Semoga Anda tidak bosan dengan isi Blog ini dan Anda bisa kembali berkunjung lagi.

Sabtu, 26 November 2011

How to Reset Canon Printer Pixma iX4000 or iX5000



  1. Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ) .
  2. With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
  3. While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
  4. While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
  5. When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
  6. At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.
Note: Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.
Other specified number of time(s) according to the function listed in the table below.
Time (s) LED indikasi Fungsi Keterangan
0 times Green (Power) Power off
1 kali Orange (Alarm) Service test print
2 times Green (Power) EEPROM mencetak informasi
3 times Orange (Alarm) EEPROM initialization
4 times Green (Power) Waste ink counter ulang
5 times Orange (Alarm) Tujuan pengaturan
6 times Green (Power) Print head deep cleaning (Pembersihan kedua hitam dan warna)

0 komentar:

Posting Komentar

Adhe edogawa.

Check Page Rank Blog/Web site Anda disini:

This page rank checking tool is powered by Page Rank Checker service

Like Facebook

Pengikut